Featuring a width of 60mm., main profiles
with 3 chambers and an inner-outer sealing system, the PIMAPEN
S-6000 CLASSIC series has a wide range of use that allows for many
kinds of door and window solutions. PIMAPEN S-6000 CLASSIC is
distinguished by its superior insulation features making it suitable
for diverse climactic conditions, as well as its suitability for
wide window and door openings. S-6000 CLASSIC System
Features
1. The system features an inner-outer
sealing system.
2. The main profiles have 3 chambers.
3. The outer wall width is 3mm. (RAL GZ 716/1).
4. All main profiles have 60mm. width.
5. Inner surfaces of glass molding pieces have inclining angles.
6. The channels for the molding pieces inside the frame are covered
by special covering profiles at sections which open.
7. The system allows for the use of single, double and triple
insulation glasses or plates with width ranging from 4mm to 30mm..
8. The glazing seals have been designed to be invisible from the
outside.
9. All water drainage chambers for the main profiles have a inclined
design allowing for ease of water flow.
* The shutters have special mounts that allow for the construction
of double shutter windows and doors without stationary mullions in
the middle.
* The system features two locking doors solutions: opening to the
outside and to the inside (both have their glass molding on the
inside).
* Locking doors without thresholds are endowed with aluminum door
footing, aluminum threshold profiles and with sealing for water
insulation purposes.
U profile = 1,47 W/m2k
U window = 1,26 W/m2k.
|
|
